Fast sexdating

06-Sep-2017 21:21

I turned off Display Week (which displays the day of week) to make it smaller and moved the date down to the lower right.

I turned off camera name (Display Name) for my purposes but you here you can put the location name, like Driveway, Backyard, Office, etc.

For example, if you chose 1080P, then you have to click on 16:9, if you chose 3MP mode, then click on 4:3. What’ different here than the previously reviewed Hikvision cameras are the audio controls at the bottom.

The speaker volume control in the lower left, the microphone on/off icon in the lower right.

It comes with a weatherproof connector should you need it.

In order to take advantage of it, you need to cut the Ethernet plug, slip the weatherproof connector through and then crimp on a new RJ45 plug.

Another unique feature on this camera is the micro SD card slot and ability to play back recordings.I’ll go over some of the setup screens of interest.After setting the IP address in SADP, you can change it again under Network, but since that’s done, the next step may be configuring the ports if you want to access the cameras from the internet.Under Advanced Configuration / System are where you can set the Time Settings, in my case, I used the old standby Windows NTP server to keep all my cameras time synced the same way.From the Advanced Configuration you can also set the Daylight Savings Time (DST) schedule for your area.

Another unique feature on this camera is the micro SD card slot and ability to play back recordings.

I’ll go over some of the setup screens of interest.

After setting the IP address in SADP, you can change it again under Network, but since that’s done, the next step may be configuring the ports if you want to access the cameras from the internet.

Under Advanced Configuration / System are where you can set the Time Settings, in my case, I used the old standby Windows NTP server to keep all my cameras time synced the same way.

From the Advanced Configuration you can also set the Daylight Savings Time (DST) schedule for your area.

Line-in means it takes an amplified microphone, but this requires a separate power source, but you can use mic-in which takes a standard microphone, no power needed.